Copyright©2023 | Lab developed by Virtual Labs, IIT Roorkee
Components
Formulae
At Balance codition:
For inductor with high Quality factor:
Hays Bridge Experiment
close
-
STEP 1:
Pick up three resistances, a battery, a inductance, a capcitor
and a galvanometer from the toolbox.
-
STEP 2:
Connect all component as shown in the figure to form a Hays
Bridge Circuit.
-
STEP 3:
After making the circuit click on check circuit button to
check the connections
-
STEP 4:
Now Enter the the value of R2, R3, Capacitance, Volatge and
Frequency and try to make deflection in meter close to zero.
-
STEP 5:
Calculate the value of inductance using the formula given and
check the value using the check button.
-
STEP 6:
Enter the value untill the bridge gets balanced.
-
STEP 7:
Click on submit button to add it into observation table.
-
STEP 8:
Repeat the Experiment for new generated value of inductance.
close
Calculations
Give Inputs:
Deflection
--.--
Observation Table
| R1(Ω) | R2(Ω) | R3(Ω) | R4(Ω) | L (H) | Volt(v) |
|---|